GameMax Panda Full Tower 2 x USB 3.0 Tempered Glass Side Window Panel White Case with Addressable RGB LED Lighting & Fan
- Additional information
The GameMax Panda Mid-Tower gaming case is available in black or white, the Panda is simple with an elegant look, enables first time gamers or experienced gamers create a clean and beautiful system.
The GameMax Panda Mid-Tower case is designed to create a clean looking build with a hint of ARGB. Available in Black or White an ambient glow adds character with three LED strips included and a rear ARGB fan gives you cooling right out of the box. With the rest of the chassis made using metal and plenty of air intake/exhausts gives the case a subtle look that will perform in any environment.
The considerate amount of detail GameMax have put into designing this case enables you to have a better performance experience, this is highlighted by the wireless switches between the ARGB panel on the front panel and the metal chassis, you can easily remove the front panel and place back on without damaging the cables.
The easy to build case comes pre-installed with a GameMax V2.0 PWM ARGB Hub allowing for stunning lighting effects and easy connection to your system. You can connect up to five fans and two LED strips to the hub and sync all to your motherboard using the 3 Pin AURA connection, please note the hub to motherboard AURA connection is not included and will needed to be purchased separately. Please note the included hub supports a total of 5 fans.
The left side panel is made of 4mm tempered glass with a one screw connection making it easy remove and put back on. You can also show off the aesthetics of your build seen through this stunning glass panel.
Even though the Panda comes with a compact design its ready to build with minimal fuss.
In line with the GameMax ethos this case offers style, performance and the ultimate experience.
Compatible with the Following Fans
The GameMax Panda is compatible with the following fans:
– GameMax Mirage Dual-Ring Rainbow RGB 120mm Fan
– GameMax Mirage White Fins Dual-Ring Rainbow RGB 120mm Fan
– GameMax Razor 120mm Rainbow ARGB Fan
– GameMax Velocity 120mm Rainbow ARGB Fan
– GameMax ARGB 3 In 1 Kit
Compatible with the Following Hubs
The GameMax Panda is compatible with the following hubs:
– Spectrum ARGB Hub
– GameMax ARGB Fan Hub
The Panda is a brilliantly designed Mid-Tower PC gaming case with room for an E-ATX motherboard, an all black or white chassis featuring vents running down either side of the front panel and on the right hand side unique cut outs enable exceptional airflow. The three built in LED strips, two running down the side of the front and one along the PSU shroud and with a rear ARGB fan makes the Panda a real spectacle in any gaming environment.
You can now take your colour control to new levels with the included ARGB motherboard connection on the PWM hub, simply connect the 3pin AURA from your motherboard and you can use the mobo software to sync your fans and strips the way you like.
Excellent cooling options are on offer for such a compact system with room to mount a total of five fans and room to mount water cooling radiators on the front (Up to 240mm), top (Up to 240mm) and rear (Up to 120mm) your case will have no problem cooling those high end components.
Included in the Panda is an ARGB V2.0 ARGB PWM hub, connect up to five fans and two LED strips, have access to 18 colour modes manually or have even more using the motherboard software. Once all connected enjoy PWM auto speed controlled via MBs PWM signal, also 2 RGB buttons (Mode & Brightness), it much better for user to easy adjust light mode and adjust between 5 different brightness modes (0-20-40-80-100%).
A tooless 4mm full left side tempered glass panel to show off your build from all angles.
Located on the top and bottom of the Panda are dust filters, on the top is a magnetic dust filter and on the bottom of the chassis is full length and is easy to remove helps to prevent dust from getting into your build and helps improve the performance of your chassis.
E-ATX (272 x 305mm)
Water Cooling Ready
Supported Radiator Size
Supported Radiator Positions
3.5" Internal: 2
2.5" Internal: 4
Notes: 2 x 2.5" & 3.5" shared
Front: 2 x 120mm Fans
Top: 2 x 120mm Fans
Rear: 1 x 120mm Fan (1 x 120mm Game Max Mirage Dual-Ring ARGB Fan Included)
Fan Controllers: 1 (controlling up to 5 fans in total)
Fan Controller Specifications
Controller Included: Yes
Powered Via: SATA
LED Controller: Yes
Fan Connector: 3-Pin Fan Connector
LED Connector: 3-Pin AURA
Fan Control Via: PWM
Max Number of Fans: 5
Supported Qty Of LED: 5
2 x USB 3.0
1 x HD Audio
1 x Microphone
Internal Cable Management Depth: 15mm
GPU Max Length: 360mm
CPU Cooler Maximum Height: 170mm
PSU Max Length: 190mm
What’s In The Box
V2.0 Controller Manual
PWM Fan Connector
Product Dimensions ( W x H x D )
215mm x 470mm x 442mm
Packaging Dimensions ( W x H x D )
280mm x 510mm x 526mm
Net: 6.4 KGs
Gross: 7.6 KGs